Serious Straight Drill Guide Jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a jig to help you to drill straight holes on the fly with a hand drill. The jig is simple to use, just align…
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 93
- Wydruki
- 1
- Wyświetlenia
- 1014
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a jig to help you to drill straight holes on the fly with a hand drill. The jig is simple to use, just align your drill bit flush to the two walls and you're ready to go. The jig is very stable, with a reduced foot print and a good grip.
The jug works with any round drill bit, even forstner ones. You can't use bits that are not round, like spade drill bits.
Print Settings
Printer Brand:
RepRap
Printer:
Prusa I3
Rafts:
No
Supports:
No
Resolution:
Best print : 0.3mm Nozzle, 0.2 layers, 3 walls, 5 layers for top and bottom
Infill:
20 to 25%
How I Designed This
Rework of an oldtimer easy jig !
It's a tip I learned from my grand'pa. His jig was a simple 45° cut on an offcut block of wood. I made a lot of these jigs by the past, but I lost them as soon as I finished using it ! Because it's just another block of wood... So I wanted something I can keep on a pegboard and stop wasting some time to build another each time I need it !
I wanted a small footprint to be able to use the jig even in small places likes inside a cabinet. A good grip is a must because blocks of wood are not always easy to hold and it slips easily. I did not wanted it to be to high to, because height limits the depht of cut of small drill bits. Last, I wanted the V shape to be large enough to hold small bits to large ones.Category: Tools