Closet Rod End Support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement for broken wooden rod supports
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial
It seems like the wood version of these always has a weak side from the grain. I think one printed in any good filament should be better. I recommend printing with minimum 4 or more layers all around (~2mm) and somewhere around at least 20% infill. I used a long wood screw for mounting.
This one is for a 1-½" rod. You can scale it for other sizes, or if your rod has several layers of paint on it.
I chiseled out the broken original. The center home is intended to be the main mount, while the off-center hole can be used to maintain vertical alignment with a small fastener. The off-center hole can also take a regular fastener.