Closet Rod End Support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement for broken wooden rod supports
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 0
- Views
- 148
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial
It seems like the wood version of these always has a weak side from the grain. I think one printed in any good filament should be better. I recommend printing with minimum 4 or more layers all around (~2mm) and somewhere around at least 20% infill. I used a long wood screw for mounting.
This one is for a 1-½" rod. You can scale it for other sizes, or if your rod has several layers of paint on it.
I chiseled out the broken original. The center home is intended to be the main mount, while the off-center hole can be used to maintain vertical alignment with a small fastener. The off-center hole can also take a regular fastener.