1 / 4
Magnetic SD-Card holder for Original Prusa Enclosure — zdjęcie 1
1 / 4

Magnetic SD-Card holder for Original Prusa Enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple magnetic SD-card holder for the original Prusa Enclosure. The holder can be attached in different positions.

Ocena
5 / 5
Polubienia
6
Pobrania
44
Wydruki
2
Wyświetlenia
258
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

This simple SD-card holder for the Original Prusa Enclosure offers easy storage of four SD-cards. Due to the attached magnet the holder can be mounted in various positions on the profiles of the enclosure. The SD-logo adds a nice little touch. I use the holder to cue up the next prints for the printer on different SD-cards.

I printed the part from PETG with regular 0,2mm quality settings (MK3S+) but PLA will be fine too.

The holder is designed to be used with a 25x2mm magnet with adhesive backing (i.e.: https://www.supermagnete.de/selbstklebende-magnete-neodym/scheibenmagnet-selbstklebend-25mm-2mm_S-25-02-FOAM). I have found the adhesive to be too weak over time so I suggest you use a drop of superglue to fix the magnet in place permanently.

I have made the Fusion360-file avaliable so you can tailor the part to your needs.

Tagi