1 / 6
Rook CoreXY RPI Zero W, 5v Regulator and Relay Mount — zdjęcie 1
1 / 6

Rook CoreXY RPI Zero W, 5v Regulator and Relay Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mounts to hold an endstop, Raspberry Pi Zero W, a 5v regulator and a relay. Using Klipper to control the relay.

Ocena
0 / 5
Polubienia
3
Pobrania
20
Wydruki
0
Wyświetlenia
188
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Endstop mount has been designed to print separately then to be bolted together so it's easier to print. No supports needed.

5v regulator should be attached by double sided tape or glue, as it doesn't have any bolt holes.

Relay attaches with 2x M3 screws.

RPI Zero attaches with 2x M2 screws.

 

Relay:

https://www.ebay.co.uk/itm/261993826722

 

5v Regulator:

LM2576HV DC-DC Step Down Adjustable Power Supply Buck Module LM2576 LM2576HVS DC-DC 5V-60V Input 1.25V-26V Output

https://www.aliexpress.com/item/1005003923533090.html

 

Endstop:

https://www.aliexpress.com/item/1005003074103806.html

 


 

Tagi