Rook CoreXY RPI Zero W, 5v Regulator and Relay Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounts to hold an endstop, Raspberry Pi Zero W, a 5v regulator and a relay. Using Klipper to control the relay.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 20
- Makes
- 0
- Views
- 188
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Endstop mount has been designed to print separately then to be bolted together so it's easier to print. No supports needed.
5v regulator should be attached by double sided tape or glue, as it doesn't have any bolt holes.
Relay attaches with 2x M3 screws.
RPI Zero attaches with 2x M2 screws.
Relay:
https://www.ebay.co.uk/itm/261993826722
5v Regulator:
LM2576HV DC-DC Step Down Adjustable Power Supply Buck Module LM2576 LM2576HVS DC-DC 5V-60V Input 1.25V-26V Output
https://www.aliexpress.com/item/1005003923533090.html
Endstop:
https://www.aliexpress.com/item/1005003074103806.html
