Ender 3, Titan Clone, ED3 V6 + Volcano
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved compatibility with clone titan extruder, added prove 18mm holder, adjusted right fan holder to reach a Volcano
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 972
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix to include the following changes:
1. Thicker mount to allow printing with a 0.6 Nozzle. See “mount for titan - thickened”
2. Body: the titan extruder hold plate has been moved towards the front by 4mm as my clone extruder didn't fit on the original. Perhaps because I have a clone titan extruder.
3. Probe holder: There are two holders: one to attach to the body instead of the left hand fan or one to attach to the back plate so that you can still have two blower fans.
4. Right fan duct extended: Extended the right hand fan (10mm on the screw section) so that it reaches a volcano hotend. I also thickened the walls so that they could be printed easily on a 0.6 nozzle.
Here is link to oneshape designs:
https://cad.onshape.com/documents/83cbe5cae40120882c35c05d/w/5c38be3365989291e51e334e/e/a1bc66f4dc58b86f08f79ed5?renderMode=0&uiState=64e4717c28e4bb63d2006a8f