DJI Mavic 3 Pro Battery Holder - Skadis Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Skadis Mounted battery holder for the DJI Mavic 3 Pro. Holds three batteries securely on the Ikea Skadis pegboard.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 195
- Wydruki
- 0
- Wyświetlenia
- 1292
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently got a new DJI Mavic 3 Pro and needed a way to mount the extra batteries on my Skadis ‘peg board’ from Ikea. I use these boards to organize all of my photography and video equipment.
I couldn't find anything that worked so threw something together quick in Fusion 360 - if you use this, please like and share your makes! I really do like to see how others are using the models.
When printing I did enable supports for the hooks, and I added a modifier to them increasing the infill to 100% and 4 walls to give it plenty of strength at those potential failure points. Depending on your Skadis board the hooks may be very tight - I have a black painted board and I did need a bit of force, I may fix them later, but if you don't want to force it you could easily file down a bit of the inside vertical of the hook., or add a modifier in your slicer to not print about .5mm
For those using a Bambu X1C, I have added a zip file of the gcode output you can print. Printables choked on a few of the Bambu Lab specific GCODE statements so I had to zip and upload.