Wavy Pen Cup (Vase Mode) with alternate models
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Decorative Wavy Pen Cup can be printed in Vase Mode with 2 alternate models
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 153
- Wydruki
- 0
- Wyświetlenia
- 801
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Details
After my first vase model I wanted to create something with a finer pattern. This time I used some spheres to emboss/deboss the surface. I played a bit with the radius of those spheres and it produced this wavy pattern.
Dimensions (h x w x d): 102.7mm x 94mm x 94mm (basically 10.5cm x 9.5cm x 9.5cm)
Alternate models
The base model has a more protruding pattern at the middle and it becomes smoother at the top/bottom resulting in a barrel-like (narrow-wide-narrow) shape. The alternate models play a bit more with this, the alternate model #1 has a narrow-wide-narrow-wide-narrow and alternate model #2 has a wide-narrow-wide-narrow-wide shape.
On the cover photo:
- base model: in the middle with the colorful markers
- alternate model #1: on the left with the black pens
- alternate model #2: on the right with the colorful pens
Instructions
I attached the .gcode file for MK4 but in case you have a different printer all you have to do in PrusaSlicer (i use v2.6.0) is checking Spiral Vase on the Print Settings tab and it will add the necessary changes (like bottom layer, perimeter, etc).
Test
Tested on an MK4 (v4.7.2) with Marble Grey Prusament PLA (still in love with this color!).