Wavy Pen Cup (Vase Mode) with alternate models
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.01 – €2.45 net (excluding VAT)
For file: wavy-pen-cup-alternate-1-vase-mode.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.23 excluding VAT (range midpoint).
- Weight reported by the author
- 24 g
- Print time reported by the author
- 2.42 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Decorative Wavy Pen Cup can be printed in Vase Mode with 2 alternate models
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 153
- Makes
- 0
- Views
- 801
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Details
After my first vase model I wanted to create something with a finer pattern. This time I used some spheres to emboss/deboss the surface. I played a bit with the radius of those spheres and it produced this wavy pattern.
Dimensions (h x w x d): 102.7mm x 94mm x 94mm (basically 10.5cm x 9.5cm x 9.5cm)
Alternate models
The base model has a more protruding pattern at the middle and it becomes smoother at the top/bottom resulting in a barrel-like (narrow-wide-narrow) shape. The alternate models play a bit more with this, the alternate model #1 has a narrow-wide-narrow-wide-narrow and alternate model #2 has a wide-narrow-wide-narrow-wide shape.
On the cover photo:
- base model: in the middle with the colorful markers
- alternate model #1: on the left with the black pens
- alternate model #2: on the right with the colorful pens
Instructions
I attached the .gcode file for MK4 but in case you have a different printer all you have to do in PrusaSlicer (i use v2.6.0) is checking Spiral Vase on the Print Settings tab and it will add the necessary changes (like bottom layer, perimeter, etc).
Test
Tested on an MK4 (v4.7.2) with Marble Grey Prusament PLA (still in love with this color!).