RC Car Pull Pin for smaller vehicles 1/16 1/18
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dedicated to small vehicles, easy and quick print
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 575
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
As a lot of pull pin models are designed with bigger pins and vehicles in mind I created this one dedicated to 1/16 and 1/18 scale, for example for Eachine EAT 15 and similar.
The goal was to keep the back completely flat in order to help with bed adhesion and also have enough material close to the pin hole.
Pushing the pin apart with pliers while attaching the puller helps the process.
Print settings
I printed this in eSun PLA+ without issues or broken pullers.
Supports needed: No
If you print multiple at once I recommend checking “complete individual objects” in Prusaslicer.