Faucet Adapter/Extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Faucet Adapter/Extension to connet to a tube in order to extend the reach of the faucet.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 731
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I whipped up this Faucet Adapter/Extension so I could hook up this tube I had lying around in my office. That way, I could easily fill up my mop bucket without having to take apart the bathroom setup.
Since there weren't any other simple hacks to fill my mop bucket in the office, I just grabbed that tube and got creative with a faucet adapter.
You'll notice a little lip at the back – perfect for sticking on some Velcro or looping a zip tie through. That'll keep it put for the long haul, or you can just use it to yank the adapter off the faucet with ease.
Oh, and just a heads up: the fit on my faucet is tight as can be, no slipping. But you might need to tinker with it a bit to make it work for your faucet's size.
The hole in the middle is about 2.4cm wide in this model.
I printed this baby with PLA using a 0.2 layer thickness and around 10% infill.
Happy printing, folks!