Vanagon Westfalia Curtain Valance
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was modelled after an 84 Westy curtain valance (passenger side, above the bed).
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 771
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Edit: Added June 12 2026: Split into 3 parts for smaller printers.
Edit2: Added June 22 2026, added flanges the 3 part split pieces to make it easier to glue together (more surface area at the joint)
These valances are infamous for crumbling due to questionable plastic used in their manufacture, and the ravages of heat and time. My van happened to have one more-or-less intact.
This does NOT include the screw holes, you'll have to drill them yourself. This is due to slight variations on different years of vans.
Recommended you print it at 100% infill.
It's ~700mm long, so is a challenge to print in one piece.
ASA or ABS or PETG is a good idea for temperature resistance. PLA might work, but no promises for long term. Definitely paint it with something.
TPU is an interesting option, although hard to glue together.