WTF Refrigerator Magnet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
WTF?? A simple quick print refrigerator magnet
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
I whipped this up as a quick test print for validating things like leveling and z-offset, and decided I liked it enough to put a magnet on it.
By default at 100% it has room for 10mm x 2.6mm magnets like these on amazon (non-aff). I also include a version without the prebuilt hole for the magnet in case you want to add your own or use it for a different purpose (large signs??)
Tips to add your own: I did the original in the slicer, adding a 12x12x4mm cylinder to the object (so ~2mm bigger than the magnet), then a negative space cylinder inside that of 10.5x10.5x2.5mm (~0.5 bigger than the magnet). Obviously I made it shorter, this is just so the magnet protrudes just a little bit.
I recommend 10% Lightning Infill to reduce weight if desired. Also works great as multi color if you want the back support bar different.
This is a fun little print, do with it what you will! I just ask that you post your makes and reviews for all to see!
—
If you look closely at the second picture, you might notice my gecko remix of a “sticky gecko” :D https://www.printables.com/model/191302-sticky-gecko-magnet