Prusament Screw-Top Container v2: Trash-Can-Lid Enhancement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This part enhance Prusament Screw-Top Container v2 to convert two Prusament spool cardboard cores into a desk trash bin
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 67
- Wydruki
- 2
- Wyświetlenia
- 877
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
This is a new modified lid to enhance "Prusament Screw-Top Container v2" to be able to convert two Prusament spool cardboard cores into a desk litter box / trash can.
The lid is based on lid design from Uko (see link in model origin section).
It's designed to be print-in-place. So no Support needed. Best you use PLA and standard settings with a 0.2mm layer hight (or smaler) on a 0.4mm standard nozzle (no supports).
After printing glue in a weight into the opening of the center pin. Or screw in a heavy screw, like I did. This helps to keep the lid in balance (closed).
Besides the lid you need two Prusament spool cardboard cores, which you glue together. I used common white glue, nothing special.
From original “Prusament Screw-Top Container v2” models by @UkoTerpuh (also link in model origin section), you need to print:
- prusament-screw-top-container-v2-bottom.stl and press it into one side.
- prusament-screw-top-container-v2-top.stl and press it into the other side.
Screw this lid on this assembly and you've got a nice desk litter box / trash can.
Hope it works for you too …
Happy printing …