Work Sharp Ken Onion Type Grinders - LeadingEdge Upgrades
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a blade grinder / platten attachment with different platforms for the Work Sharp Ken Onion type and similar…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 957
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a blade grinder / platten attachment with different platforms for the Work Sharp Ken Onion type and similar grinders.
It allows you to use your grinder as a multi purpose grinder with a platten and platform for grinding and shaping knives and metal.
It can be used without the platforms, or with the various angled platforms.
Simply remove your knife sharpening guide from your grinder, and slip my attachment onto the same bracket. Make sure you install the grinding belt AFTER you have installed my attachment.
Parts required:
2 x M4 Screws (30mm long)
2 x M4 brass threaded inserts
NOTE:
Some of my other useful designs:
https://www.thingiverse.com/leadingedge/designs
If you find my designs useful, please go ahead and click on "Tip Designer" to the right of the photos at the top of this page. Proceeds will be used to purchase printing filament so I can keep designing and testing cool new things that you might find useful.
Thank you!
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Infill:
100%
Filament: PLA PLA Your Choice
Notes:
If you find my designs useful, please go ahead and click on "Tip Designer" to the right of the photos at the top of this page. Proceeds will be used to purchase printing filament so I can keep designing and testing cool new things that you might find useful.
Thank you!Category: Tools