Prusa MK4 PSU Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement Part for PSU in honeycomb style if you place your PSU outside of your Enclosure
- Ocena
- 4,893 / 5
- Polubienia
- 151
- Pobrania
- 521
- Wydruki
- 33
- Wyświetlenia
- 4120
- Oceny
- 28
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacementpart for PSU from Prusa MK4. If you want to place your PSU not on the foreseen place you can use these replacementpart. For example if you want to place your PSU outside of an enclosure.
Recommend to Print in temperature resistant Filament like PETG, ABS or ASA. Especially if you want to use it inside an Enclosure.
You can use the original M3 Screws from the PSU but you need tow aditional M3 hexagon nuts (M3n)! The Nuts can be inserted on the tow upper Screws at the Main frame. On the bottom screws you can add also some M3 washers. The adition Hexagon nuts and washers should be included in the Spare Parts from the printer.
Edit 05.10.23: Added Version vor M4 Screws