Vacuum hose holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for a large hose.
- Ocena
- 5 / 5
- Polubienia
- 87
- Pobrania
- 606
- Wydruki
- 5
- Wyświetlenia
- 2183
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
A wall mounted holder for a large hose, in my case, for a vacuum hose. I searched around and didnt really find any mounts to accommodate such a large hose in multiple coils. The model is split into two parts for no support printing.
There are 2 part "B"s, one is smaller and one larger, to fit even more coils of the hose. In the picture, there is the smaller part B.
To attach to the wall, use screws and plastic anchors. To attach part B, use 4mm or similar wood/wall screws.
The part B model is exported as 2 separate objects. If you want to print it like I did with the hex patter, turn on the following settings for the inner circle body. TOP and BOTTOM layer = 0, infill 10% hexagonal/honeycomb.