Mounting brackets for Eviciv 7 inch touchscreen monitor, for the Original Prusa Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
RasPi and touchscreen mount, with cover plate to hide the USB cables behind
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 477
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This was the fourth of my enhancements/addons that I created for the Original Prusa Enclosure half a year ago (see my other models here on Printables).
It is a three-parts bracket (two models) that fits the mounting holes of an Eviciv 7 inch touchscreen. I use this touchscreen together with a Raspberry Pi and an installation of Repetier Server. I don't know if it will fit touchscreens from other manufacturers too.
With this holder I mounted the touchscreen on top of my Original Prusa Enclosure, using some M3 bolts and nuts.
I didn't like the look of the USB connectors sticking out of the right and left sides of the device. That's why I created an additional cover plate behind which the plugs can be hidden. This is put over the touchscreen from behind and is then held in place by the USB plugs.
The base part of the bracket need small supports at the front end. The rest can be printed without supports.