Astrocam 110 Tribute
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model will make the new video Astrocam look like the Astrocam 110.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
THIS IS AN UNTESTED BETA MODEL
ALL FEEBACK AND TESTING IS WELCOMED
Astrocam 110 Tribute!
Remember 110 film? Remember the Estes Astrocam 110 rocket that if you were lucky would give you one snapshot per flight!! Remember 1 hour photo developing??
Ok, then this may be the tribute model for you. It takes the NEW Estes (video) Astrocam and mounts it in a replica shell that looks like the Astrocam 110!
I've not had a chance to test fly this and I don't have the BT-56 body tube but it SHOULD work. I've included both Fusion 360 and STEP files so you can tweak it as needed.
- The new Estes Astrocam fits snugly into the shroud
- The shroud then snaps into the Astrocam 110 body.
- The Shroud can look up (classic position) or down.
- There are relief holes so you can activate the camera.
- There is a loop hole in the shoulder so you can attach a shock cord.
I've added a Prusa Slicer project file that setups supports and infill.