1 / 10
Purge Pellet Removal System a.k.a. PPRS (The Original conveyor for MMU printers) — zdjęcie 1
1 / 10

Purge Pellet Removal System a.k.a. PPRS (The Original conveyor for MMU printers)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an auger styled conveyor system to convey your purge pellets from a source to the edge of the table or trash can

Ocena
0 / 5
Polubienia
50
Pobrania
78
Wydruki
0
Wyświetlenia
2338
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Currently Making Upgrades


Please be patient. Also Manual in the works.

This conveyor can be used to transport your purge pellets to the edge of the table to drop into a trash can. Remove the need to empty that bin behind your printer of purge pellets every couple of hours. 

For the latest on this project and others, join my group:

https://www.facebook.com/groups/3DPrinterModding/

Printer Settings:

  • All components 10-15% infill Any material but it is recommended to print at least the middle section and the auger in ABS+ and spray the auger and auger channel with silicone spray to keep hot pellets from sticking.

Control:

  • This only needs to run for about 3-5 minutes every hour. I recommend using a timer to accomplish this or better yet, Home Assistant to control on/off times.

Parts Needed:

 I put a lot of work in this and would really love to see some LIKES and MAKES!

Tagi