1 / 10
Purge Pellet Removal System a.k.a. PPRS (The Original conveyor for MMU printers) — image 1
1 / 10

Purge Pellet Removal System a.k.a. PPRS (The Original conveyor for MMU printers)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is an auger styled conveyor system to convey your purge pellets from a source to the edge of the table or trash can

Rating
0 / 5
Likes
50
Downloads
78
Makes
0
Views
2,338
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

Currently Making Upgrades


Please be patient. Also Manual in the works.

This conveyor can be used to transport your purge pellets to the edge of the table to drop into a trash can. Remove the need to empty that bin behind your printer of purge pellets every couple of hours. 

For the latest on this project and others, join my group:

https://www.facebook.com/groups/3DPrinterModding/

Printer Settings:

  • All components 10-15% infill Any material but it is recommended to print at least the middle section and the auger in ABS+ and spray the auger and auger channel with silicone spray to keep hot pellets from sticking.

Control:

  • This only needs to run for about 3-5 minutes every hour. I recommend using a timer to accomplish this or better yet, Home Assistant to control on/off times.

Parts Needed:

 I put a lot of work in this and would really love to see some LIKES and MAKES!

Tags