5 Blade Spinner for Planeprint Super Tucano
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spinner for the Planeprint Super Tucano and 5 blade FMS 10x7 propeller
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 168
- Wydruki
- 0
- Wyświetlenia
- 1314
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a five (5) blade propeller spinner designed for the Planeprint Super Tucano (Super Tucano | Planeprint – very light 3d printable rc planes) and the FMS 5 blade propeller that comes with the FMS PC-21 Pilatus (FMSPROP015). The original Planeprint files come with a 2 and 3 blade spinner, but I wanted something ‘more scale’ and designed this one in OpenSCAD. Overall dimensions are similar to the originals.
You will need the FMS prop and 5 2x6 screws for securing the top to the base after the base and prop has been installed to the motor/collet. I recommend ABS or PETG for these, as the heat from the motor/collet might be too much for PLA (did not try). Printed in 0.16 mm layer height, but 0.2 mm should work as well. Use two wall lines and 100% infill (parts are thin as is). Print orientation as shown, with ABS you might want to consider using a brim.
I also include the (very poorly documented) scad file for the spinner.