5 Blade Spinner for Planeprint Super Tucano
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spinner for the Planeprint Super Tucano and 5 blade FMS 10x7 propeller
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 171
- Makes
- 0
- Views
- 1,323
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
This is a five (5) blade propeller spinner designed for the Planeprint Super Tucano (Super Tucano | Planeprint – very light 3d printable rc planes) and the FMS 5 blade propeller that comes with the FMS PC-21 Pilatus (FMSPROP015). The original Planeprint files come with a 2 and 3 blade spinner, but I wanted something ‘more scale’ and designed this one in OpenSCAD. Overall dimensions are similar to the originals.
You will need the FMS prop and 5 2x6 screws for securing the top to the base after the base and prop has been installed to the motor/collet. I recommend ABS or PETG for these, as the heat from the motor/collet might be too much for PLA (did not try). Printed in 0.16 mm layer height, but 0.2 mm should work as well. Use two wall lines and 100% infill (parts are thin as is). Print orientation as shown, with ABS you might want to consider using a brim.
I also include the (very poorly documented) scad file for the spinner.