11 models
Tow Nose for the Planeprint Seagull Glider. No support needed Printed in Pla+ Use 2 mm carbon for crossbar. Use 2mm steel wire for releasebar. I did use a wing servo and printed support blocks for it. If you want to use a tiny normal…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
Sharing Cura Profiles for the Bambu Lab X1 Carbon. Could be a good stating point for those who want to print PlanePrint RC planes that require the P3 Surface profile. If you want to use these profiles, I highly suggest using Cura 5.3.1…
This printer profile is perfect for LW PLA and the planes from 3DLabprint, Planeprint, ... This is a PrusaSlicer profile, which can be used with the BambuLab X1C, because the BambuLab slicer partly does not recognize internal structures…
This is a five (5) blade propeller spinner designed for the Planeprint Super Tucano ( Super Tucano | Planeprint – very light 3d printable rc planes ) and the FMS 5 blade propeller that comes with the FMS PC-21 Pilatus (FMSPROP015). The…
Setup your X1C in cura first according to AmaZzor‘s tutorial. https://www.printables.com/model/420771-cura-start-end-gcode-for-bambu-lab-x1c-p1p The printing profile is tweaked from gfalgiano's PLA profile.…
This is a dedicated motor mount for the Turnigy SK3 2822 1740. it needs holes for 16 and 19mm distance. It must be used with the Rise upgrade kit https://www.planeprint.com/product-page/rise-upgrade-kit-motor-spoiler Print Settings…
Plane hanger sized for the wheel of the notos
This is a remix from the original part made by Planeprint. For use with a motor that has 4 screw holes 12mm apart. (I used an Emax 1306 4000kv with a LADRC 3.8" prop).
This is a simple clip that goes through the depron wing to retain the wingspars. Using these means that you don't have to glue or tape the spars in place. Print with PLA or PLA+ 0.2 layer height (8 of them weigh less than 0.5g)
This is a simple clip that goes through the depron wing to retain the wingspars. Using these means that you don't have to glue or tape the spars in place. Print with PLA or PLA+ 0.2 layer height (8 of them weigh less than 0.5g)
This is a remix from the original part made by Planeprint. For use with a motor that has 4 screw holes 12mm apart. (I used an Emax 1306 4000kv with a LADRC 3.8" prop).
