1 / 1
Belted Z Belt Tensioners - Black Knight Ver Remix — zdjęcie 1

Belted Z Belt Tensioners - Black Knight Ver Remix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is remix of Beltdriven Tensioner for the Haldis Black knight linear rail kit for the ender 3.

Ocena
5 / 5
Polubienia
11
Pobrania
23
Wydruki
2
Wyświetlenia
575
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

This is remix of Beltdriven Tensioner for the Haldis Black knight linear rail kit for the ender 3/S1.

The original model works but the belts weren't parallel. I have updated the design to the v3.7 version of KevinAkaSam's belt driven z mod, and have adjusted it so that the belts now run parallel when used on the black knight kit.

These parts replace the original metal z lead screw mounts. I attached it to the original Black Knight kit using 8 M3x8mm bolts, if you have brought one of the belted z kits from DFH/Powge/Dremc then you will probably won't need to buy extra bolts.

Don't forget that you still need the rest of the belt driven z mod, except for the left/right belt tensioner.

The filament used in the picture is Sparta 3D Sparkle ABS+ Bright Orange and Galaxy Black.

Print Settings 

Follow the default print guide for the Belt mod

  • Print in ABS/ASA or PETG
  • Infill = 55%
  • Walls/Perimeters = 5
  • Top Layers = 5
  • Bottom Layers = 5
  • Supports = none

Tagi