IKEA Bror Gap Filler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model fills the gap when attaching two IKEA BROR units together that have cabinets.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 623
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
The BROR shelves fit together flush when you combine two units, but if your units include the lower cabinet there will be a gap between them, and things you put on top are bound to fall into that hole.
This model allows you to fill that gap in a simple way. The hole is 31.4cm x 9.2cm, but in order to make it easier to print on a smaller printer, the piece is half-length (15.7cm) and you need to print it twice.
Use one of the short ends as the base for printing to keep things smoother. if you use the top as the base it should still work but the rounded edges will be a bit messy.