1 / 3
Ortur LM 2 Pro S2 Metal Case Air Vent on the Right side — zdjęcie 1
1 / 3

Ortur LM 2 Pro S2 Metal Case Air Vent on the Right side

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

closing the original Air Vent on the Ortur Metal Enclosure and changing it to the right side

Ocena
0 / 5
Polubienia
1
Pobrania
18
Wydruki
0
Wyświetlenia
227
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

We installed our Ortur LM2 Pro S2 inside the Orture Metal Enclosure but wanted the air vent ot the side to get better acces to the wall ventilation. 

with the cover you can close the original opening.

Then you have to cut a complete new hole to the right side of the metal case. we made it 95mm. you nee the cover as a template to mark out the new holes for the final mounting.

the 80mm fan support thing is for the 80mm fan on the inside. mount it in that way that the smoke from the laser is sucked out. all holes should be drilled with a M3 thread. Use 4x M3x9 screws to mount the fan. And use 4x M3x12 screws to screw both parts together.

the 100mm mount is to hold the 102mm alu flextube https://amzn.to/3OUqXn4

for the air vent inside the wall we use a vent fan like this: https://amzn.to/47LdJ4S

 

Print the 80mm_fan_support with supports.

 

Tagi