1 / 3
Ortur LM 2 Pro S2 Metal Case Air Vent on the Right side — image 1
1 / 3

Ortur LM 2 Pro S2 Metal Case Air Vent on the Right side

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

closing the original Air Vent on the Ortur Metal Enclosure and changing it to the right side

Rating
0 / 5
Likes
1
Downloads
18
Makes
0
Views
227
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial

We installed our Ortur LM2 Pro S2 inside the Orture Metal Enclosure but wanted the air vent ot the side to get better acces to the wall ventilation. 

with the cover you can close the original opening.

Then you have to cut a complete new hole to the right side of the metal case. we made it 95mm. you nee the cover as a template to mark out the new holes for the final mounting.

the 80mm fan support thing is for the 80mm fan on the inside. mount it in that way that the smoke from the laser is sucked out. all holes should be drilled with a M3 thread. Use 4x M3x9 screws to mount the fan. And use 4x M3x12 screws to screw both parts together.

the 100mm mount is to hold the 102mm alu flextube https://amzn.to/3OUqXn4

for the air vent inside the wall we use a vent fan like this: https://amzn.to/47LdJ4S

 

Print the 80mm_fan_support with supports.

 

Tags