TPU Cable or Rope Tie (but not...)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tie to hold a wrapped cable or rope in place.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 316
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print this in TPU to hold your cable in a neat and organizable way.
Needs to be flexible it is 170mm long and has 20 slots for adjusting to smaller wrapped cables or rope.
3 sizes of files are to change the size of the circle that locks into the slots 10mm is exact because the slots are 10mm, 10.5 for a little stronger hold, and 11mm fit the strongest hold.
10.5 mm seems to be the best for holding in place and inserting into the slot.
Each larger size will resist a little bit more when inserting the lock into the slot but it will hold the cables or rope that want to go straight better too.
Printables.com told me this wasn't a cable or rope tie so use it to wrap around whatever you think would work best for. 😉