1 / 4
Tamiya Clodbuster Bullhead Dual Short Servo Conversion — zdjęcie 1
1 / 4

Tamiya Clodbuster Bullhead Dual Short Servo Conversion

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple to print and install conversion to convert a Tamiya Clodbuster to run dual steering servos by positioning one…

Ocena
0 / 5
Polubienia
20
Pobrania
118
Wydruki
0
Wyświetlenia
1467
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

A simple to print and install conversion to convert a Tamiya Clodbuster to run dual steering servos by positioning one on each axle.

Uses compact SPT4412LV 12KG Digital Servos, typically available for around 11 euros per piece.

Also required would be a couple of M3 nuts and some threaded M3 stainless steel threaded rod as the tielinks are a little short.

Print instructions

Needs a little support.
I used PETG

Tagi