Kitchen towel holder with mounting holes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remixed kitchen tower holder with screw points on the back to hold it to the drawer.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 329
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remixed kitchen tower holder with screw points on the back to hold it to the drawer and a little harder to handle thicker towels.
This is a remix of @jrmusan_441912 towel holder https://www.printables.com/model/372329-kitchen-towel-holder
The mounting holes are 108mm part and they are 2mm in size.
I printed mine on its side so the layer lines would keep it stronger without it breaking when being pulled on.
Printed in ABS, but can be printed in PLA, or PETG
Walls: 4 (so the part on the drawer is 100% filled in)
Infill: 60% Gyroid