10" Rack mount for Dray-Tek Vigor 167
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting option for Dray-Tek Vigor 167
- Ocena
- 2 / 5
- Polubienia
- 10
- Pobrania
- 192
- Wydruki
- 0
- Wyświetlenia
- 1709
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
ATTENTION!
To ensure that the device sits correctly in the bracket, its rubber feet must be removed before mounting.
This bracket is made for 10" racks. They have the standard dimensions of 1U (44.5mm) in height and 250mm in width. With these dimensions the mount can be printed on a print bed with the dimensions of 220mm x 220mm. The mount is designed to hold the unit firmly in place without loosening. Therefore, the use of screws to hold the unit in place is optional. If there is a wish to provide further files for other devices, please contact me by message.
Also see my other rack mountable models:
TP-Link ER605 Router (Omada)
TP-Link OC200 Cloud Controller (Omada)
TP-Link OC200 Cloud Controller (Omada) + tado° Bridge
TP-Link TL-SG2210P Switch (Omada)
TP-Link TL-SG108PE Switch
Philips Hue Bridge
Philips Hue Bridge + Cablehole
3x SSDs + 3x Raspberry Pis (3, 4 and 5)