dopper bottle cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cap for the dopper bottle with ring and hole for attachment.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 154
- Wydruki
- 2
- Wyświetlenia
- 740
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I didn't like the standard dopper bottle cap too much and wanted something I can stick a finger through, hook a carabiner onto, or add a cord to it. So I modeled a cap with a loop and a hole using the thread from the sodastream-dopper adapter from Bas (https://www.printables.com/model/108323-sodastream-dopper-adapter).
It includes an o-ring to be printed from flexible material. However, even without it the seal of the cap is pretty watertight, so that makes the o-ring optional. The o-rind has a notch, which should be on the direction inside the cap.
I printed it in PETG or ABS plus the o-ring in TPE (83A).
My first version of the model model was thinner and I broke it by screwing it too tight. This one is stronger, but best print with at least 4 wall loops and at least 4 top shell layers (printing with the top bit down).