dopper bottle cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cap for the dopper bottle with ring and hole for attachment.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 154
- Makes
- 2
- Views
- 740
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
I didn't like the standard dopper bottle cap too much and wanted something I can stick a finger through, hook a carabiner onto, or add a cord to it. So I modeled a cap with a loop and a hole using the thread from the sodastream-dopper adapter from Bas (https://www.printables.com/model/108323-sodastream-dopper-adapter).
It includes an o-ring to be printed from flexible material. However, even without it the seal of the cap is pretty watertight, so that makes the o-ring optional. The o-rind has a notch, which should be on the direction inside the cap.
I printed it in PETG or ABS plus the o-ring in TPE (83A).
My first version of the model model was thinner and I broke it by screwing it too tight. This one is stronger, but best print with at least 4 wall loops and at least 4 top shell layers (printing with the top bit down).