1 / 2
Truck Gun Rack — Seat-Back Headrest Rifle Mount | AR-15, Bolt Action, Sporter & Bull Barrel — zdjęcie 1
1 / 2

Truck Gun Rack — Seat-Back Headrest Rifle Mount | AR-15, Bolt Action, Sporter & Bull Barrel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D printed truck gun rack: a headrest hook that securely holds your rifle within easy reach. Sporter and bull barrel.

Ocena
5 / 5
Polubienia
120
Pobrania
758
Wydruki
2
Wyświetlenia
5279
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Open Community License v1

A dead-simple way to carry a rifle in a truck, SUV, or side-by-side. Hook the small end around your headrest post, drop the barrel into the large end. Tension holds it. No drilling, no adhesives, no hardware, no straps.

Headrest posts:

  • fits most factory vehicle headrests.

Which file do I need?

  • Sporter barrel and bull barrel versions of each version.

  • Standard version is one solid piece

  • "Swivel" versions have a print-in-place link to allow the hook to adjust to the angle of the barrel

  • "Multi-linked" versions have 4 intermediate print-in-place links to allow more conformity.

  • "38mm suppressor" a multi-linked version specifically created for a request. Yeah, it fits 38mm diameter suppressors.

  • These print-in-place links are solid and reliable even under extended use in extreme New Mexico summer time heat when printed in PETG and PCTG.

Confirmed fits

Reported by people who've printed it:

  • AR-15 and bolt-action rifles

    • .223 Rem and 6.5 Creedmoor sporter barrels

  • AR-10

    • 308 Win

    • 338 Win

  • Marlin and Savage rifles

Print settings

  • Material: PETG, PCTG, Nylons, ABS, or ASA. Not PLA — a closed vehicle in summer gets hot enough to soften it and drop your rifle.

  • Walls: 10+ perimeters, 15% infill. This isn't overkill.

  • Supports: none

  • Orientation: as loaded - flat on bed.

  • Print time: ~1 hr 46 min, ~38 g

What this is and isn't

This is a retention hook — it keeps a rifle from sliding around while you drive. It is not a locking mount and not a security device. Check your state or province's rules on transporting firearms in a vehicle before you use it.

Also from me

Tagi