Liczymy pasujące modele…
After my expensive, centrifugal-fan helmet pumper burned out, I decided I'd attempt to clone one of the newer axial fan designs. This uses a high static pressure 80mm server fan - don't try to use a “standard” PC fan; it will not make…
After my expensive, centrifugal-fan helmet pumper burned out, I decided I'd attempt to clone one of the newer axial fan designs. This uses a high static pressure 80mm server fan - don't try to use a “standard” PC fan; it will not make…
I kept getting frustrated when i would go through water and the front windows would get fogged up from steam so I worked up this defogger system. This is good for one side only. This is small enough to have one for the driver and one for…
Pumpkin Vase This is my second #Cutvase, a modern pumpkin styled Vase with a elliptical Cutout. This Vase is special and innovative! It seems impossible to print properly in Vasemode, because of the cutout and the bevel top. Through a…
Watervase This is my first #Cutvase, a modern elegant Vase Design with a Drip Cutout. This Vase is special and innovative! It seems impossible to print properly in Vasemode, because of the cutout and the bevel top. Through a little cut on…
Diamond Vase This is my third #Cutvase, a modern Vase with diamond pattern and a diamond Cutout. This Vase is special and innovative! It seems impossible to print properly in Vasemode, because of the cutout and the bevel top. Through a…
I designed this model of a Ukrainian-made Sherp ATV. Printed the body in PLA+, the wheels in TPU. Body: Supports for the axles only. 2 perimeters No infill 3 bottom layers 5 top layers 0.28 layer height Wheels: Print x 4 wheels No…
After my expensive, centrifugal-fan helmet pumper burned out, I decided I'd attempt to clone one of the newer axial fan designs. This uses a high static pressure 80mm server fan - don't try to use a “standard” PC fan; it will not make…
After my expensive, centrifugal-fan helmet pumper burned out, I decided I'd attempt to clone one of the newer axial fan designs. This uses a high static pressure 80mm server fan - don't try to use a “standard” PC fan; it will not make…
I remixed it to fit the monitor shelf of my IKEA UTVISNING desk. The monitor shelf is about 22.3mm thick and the remixed model has a gap of 22.2mm. I removed the screws from the model because it fits the shelf very well. This remixed…
Make your own ATV / UTV plates that comply with the law. USE PET-G or ABS Violating the ATV law in Wisconsin results in a fine up to $250. Violation of ATV and off-highway vehicle use regulations in Minnesota is a misdemeanor, with a…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC UTV unit . While…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the U.S. Army UTV unit , with…
I used tree supports for this. Seemed to work ok.
I kept getting frustrated when i would go through water and the front windows would get fogged up from steam so I worked up this defogger system. This is good for one side only. This is small enough to have one for the driver and one for…
This simple mount allows the attachment of an Accu-Rite thermometer to a Honda Pioneer 700. The components of this design can be used for other mounting solutions. See my ball mount here:…
newest revision. still glue together and fill with resin/ plaster of paris. brackets may not work on a factory polaris rzr cage
I bought a grab handle mounted cup holder for my SXS but the open design let smaller items fall through. This fits an 84mm opening and has held tight on the trails so far.
Test Coin how to make model in Onshape and export to stl and print via Prusa App
Headphone holder that slides into the under-table metal beam on the IKEA UTVISNING. I used hot glue to hold it in place. It is in PLA.
Cable holder that slides into the under-table metal beam on the IKEA UTVISNING. I used hot glue to hold it in place.
See the original description. Same thing for different vehicle. Printed in PLA, it's been holding up well, I may try a PETG version if it breaks.
Just needed a new latch catch that wasn't worn down and lose, so I made this based off the original, and I think it works for other types of flip up windshields also. Printed in PETG with 100% infill.
Made this for a UTV ride on, Fits perfect. Realtree 24V UTV Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: PolyMaker PETG Category: Other
A clip I made to attath a plexy glass roof to the roll cage of my Step fathers UTV I Ended up drilling holes in the clip and the plexy glass to affix them to the vehicles I used 4MM bolts to hold it on to the roll cage. Not sure if it wil…
No requiere soportes Materiales PLA y TPU para las cubiertas (tambien se puede hacer con PLA) alto de capa recomendado 0.2 el armado requiere dos ejes de alambre de acero trefilado de 2,5mm de diámetro x 57mm de largo
Here is a model Club Car Carryall 300. The .stl is at 1:18 scale but I printed my models bigger. I think 1:18 looked smaller then I wanted when I put it in my slicer, so I scaled up to 1:16. Also see my Carryall 500 version here:…
Here is a model Club Car Carryall 500. The .stl is at 1:18 scale but I've been printing my Club Car models bigger. I think 1:18 looked smaller then I wanted when I put it in my slicer, so I scaled up to 1:16. I included the flat bed and…
I wanted a hook to hang goggles on when we stop, I couldn't find any models that were for a 1.75" roll cage so I designed my own. We used some rubber pieces we had laying round to go between the clamp and the roll cage so it doesn't…
Garage Door Remote Holder for Golf Cart or UTV. Two models, one for a single three-button LiftMaster/Chamberlain remote, the second adds a spot for a Ghost Controls (gate) remote. Print as shown in the picture with no supports. Recommend…
This is a remix of https://www.thingiverse.com/thing:3743586 . It allows you to use an TH3D EZOut version 2 filament sensor with the Bondtech Direct Drive System (DDS) upgrade for CR-10 printers. I have a 500 mm version. Category: 3D…
The original design for the shut off gate was difficult to control from the driver seat of a UTV. This design has smaller holes so the fertilizer doesn't come out too quickly. It also has a built-in stop so it can be opened by pulling on…
This winch stop allows you to keep your winch line tight while protecting your fairlead from damage from your hook. I designed it specifically for small (2500–3500lb) winches typically used on ATVs and UTVs with a 5/16" or 1/4" line/rope.…
We love riding our sxs but we don't have a lot of decor to show that so I want to keep making things with that theme. I did not make the design of the sxs itself, but I turned it into a magnet for the fridge. Color change at layer 16 or…
6.5 speaker can for roll cage. Uses m3 hardware, nuts are recessed. enclosure is designed hollow to fill with plaster of paris. Cap is to be glued on after the plaster is poured and dry. supports are needed between the inner and outer…
An open cage mount for a UTV, ATV rack or jump seat for the BTECH UV-50X2 with an antenna mount. Layer height 0.15mm Infill 15% Perimeters: 5 Custom supports Recommended material PETG (Also works with my ICOM IC-F320 and Kenwood Tk-5720…
