1 / 6
Club Car Carryall 300 UTV Golf Cart — zdjęcie 1
1 / 6

Club Car Carryall 300 UTV Golf Cart

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Here is a model Club Car Carryall 300. The .stl is at 1:18 scale but I printed my models a little bigger.

Ocena
0 / 5
Polubienia
38
Pobrania
231
Wydruki
0
Wyświetlenia
1875
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution

Here is a model Club Car Carryall 300. The .stl is at 1:18 scale but I printed my models bigger. I think 1:18 looked smaller then I wanted when I put it in my slicer, so I scaled up to 1:16.

Also see my Carryall 500 version here:

https://www.printables.com/model/389469-club-car-carryall-500-utv-golf-cart

I included the flat bed and also the pickup type bed. You can make it with or without the canopy. To make it with a canopy use "ROP_L" and "ROP_R" (I know carryalls don't really have roll over protection, but I don't know what else to call it.) and the "Canopy" file. If you don't want the canopy use "Bar_r" and "Bar_l" which are the arm rest like things. Use either "Bed" or "Flat_Bed" depending on what you want.

Print one of everything except you will want to print 4 tires, 4 rims and 4 axles.

There are some alignment features for assembly, but you'll probably need some of your preferred model glue.

I printed the tires with TPU and they pressed onto the rims nicely without any glue needed. The axles needed some fine filing/sanding to ensure a nice fit with the wheels rolling adequately. I put the wheels on the axles then glued the axles to the body. After applying glue, I used my 3d print pen to weld the axles securely and permanently to the body.

I added a windshield to the white one that I made but that wasn't 3d printed, it was just a piece of clear plastic that I had handy. I also painted the lights and grille. If you are real fancy maybe you'll paint the dash board and emblems too.

Print Settings

Printer:

Qidi Tech 1

Rafts: 

No

Supports:

Yes

Filament:

Multiple ABS/PLA/TPU 

Multiple


 

Notes:

 

I used various materials for this project. Most notably, I used TPU for the tires. I'm not sure how well they would work with a non flexible filament. You might need to print them already on the rims.

Post-Printing =============

There are some alignment features for assembly, but you'll probably need some of your preferred model glue for assembly.

I printed the tires with TPU and they pressed onto the rims nicely without any glue needed. I'm not sure how well it would work with a non flexible filament. You might need to print tires already on the rims. The axles needed some fine filing/sanding to ensure a nice fit with the wheels rolling adequately. I put the wheels on the axles then glued the axles to the body. After applying glue, I used my 3d print pen to weld the axles securely and permanently to the body.

I added a windshield to the white one that I made but that wasn't 3d printed, it was just a piece of clear plastic that I had handy. I also painted the lights and grille. If you are real fancy maybe you'll paint the dash board and emblems too.

 

Category: Vehicles

Tagi