6.5 roll bar/utv speaker can
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
6.5 speaker can for roll cage. Uses m3 hardware, nuts are recessed. enclosure is designed hollow to fill with plaster…
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 493
- Wydruki
- 1
- Wyświetlenia
- 2428
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
6.5 speaker can for roll cage. Uses m3 hardware, nuts are recessed. enclosure is designed hollow to fill with plaster of paris. Cap is to be glued on after the plaster is poured and dry. supports are needed between the inner and outer layer at the opening where the plaster is poured in. personally using jbl stage 3 627 speakers, but should be universal. I can re draw to your specific size if they are different. Internal volume is .3 cubic ft
Print Settings
Printer Brand:
Prusa
Printer:
Mk2.5s
Yes
Supports:
Yes
.24
Infill:
30-100%
Category: Automotive