BEE flexibel, use the HIVE by KMS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I finally present to you the HIVE system from KMS. Inspired by the bee itself, so bee flexible use the HIVE!
- Ocena
- 0 / 5
- Polubienia
- 90
- Pobrania
- 128
- Wydruki
- 0
- Wyświetlenia
- 2305
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
About the HIVE
After many hours of modeling and especially printing. I finally present to you the HIVE system from KMS. Inspired by the bee itself, so bee flexible use the HIVE!
The system has two main components: The honeycomb (HC) element and the connection clip. Additionally for your use case I have designed some more side modules.
After many iterations I have further refined the system. The number of parts was reduced to the most necessary and the amount of filament needed was reduced. All components can be printed without support structures and no tools are needed for assembly. The geometry provides the necessary stability.
You can extend and setup the HIVE as you wish because of its modular design!
Here are a few use cases (See pictures):
| Kitchen-HIVE | Money-HIVE | Beer-HIVE | Insects-HIVE | Week-HIVE | … |
 |  |  |  |  |
if you have another one, feel free to share it with me :D
And because it wouldn't look pretty in the world without the busy bees, here's another random fact:
About 4 million flowers must be visited to make 1 kg(2.2 pound) of honey.
The "r" is what distinguishes a bee from beer :D!
Happy printing and stay tuned :D
Yours KERLE MAKERSPACE
PS:
If you like my work feel free to support by liking or leaving a comment.
Any questions? Just contact me via twitter @Kerlemakerspace or send a message :D
Disclaimer: alcohol in moderation!
Print instructions:
- Supports: all the parts can be printed without support
- Layer Height: 0.3mm
- Print Files: .3mf - Files are provided for adaptation and Gcodes for MK3s+ (_FS_ = Filament Swap)
- Filament: Prusament PETG (Jet Black and Orange)
- Temperatures for PETG
| First Layer | Second Layer | |
|---|---|---|
| Nozzle | 240 | 250 |
| Bed | 85 | 90 |
Assembly
- Assembly without Tools (Some force might be required)
- To connect the Hives use the Clips, slightly push them through the hole at an angle
- The Parts snap into position using an edge or a pin.
 |  |
Part-List--(optional)
| HC | Clip | cov. | cov.hole | cov.knife | cov.bank | week.tag | bee.tag | beer.tag | |
|---|---|---|---|---|---|---|---|---|---|
| Kitchen | 3x | 6x | 3x | 2x | 1x | -- | -- | -- | -- |
| Money | 1x | -- | 1x | -- | -- | 1x | -- | -- | -- |
| Beer | 6x | 39x | (x6) | -- | -- | -- | -- | -- | 1x |
| Insects | 6x | 39x | (x6) | (x6) | -- | -- | -- | 1x | -- |
| Week | 10x | 42x | (x10) | -- | -- | -- | 1x/1x/1x/1x/1x | -- | -- |
| Hook | Wallmount | Stand | |
|---|---|---|---|
| Kitchen | -- | -- | -- |
| Money | -- | -- | -- |
| Beer | -- | -- | x2(6x) |
| Insects | -- | 1x | -- |
| Week | 1x | -- | -- |
You don´t need all the clips they just enhance the stability for higher loads!
Customize your own tags! :D
Story behind the Hive:
As part of the contest Organizers of Prusa, I wanted to do something original and new, which did not exist so far. And when I found one morning no socks and that has annoyed me. Thought lets make an organizer for it.
So the Week Hive was born. Modular and for the work week you can put your socks and underpants ready and not search for them in the morning. Lean in the closet.
If you maybe don't want to print the model due to time limitations, feel free to leave me a like or comment and tell me what you think about the idea. Would be pleased :D!
UPDATE: All Files as a single Zip-file available.