Mako Split (Mako 69 V2 split keyboard conversion kit)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After uploading the Mako 69 V2 I saw that it was conveniently split down the middle between the QWERTY which means…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 309
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
After uploading the Mako 69 V2 I saw that it was conveniently split down the middle between the QWERTY which means that the keyboard could easily be converted into a split keyboard.
To connect the clamps to the main bodies you will need m4 screws
You only need to unsolder the space bar whilst for other parts you can just cut and extend the cable depending on how you built it.
The large holes are for the wires to pass through for those people who are ambitious you can refer to the Redox keyboard and use the 2 microcontroller way.
STUFF YOU NEED TO DO FOR THIS TO WORK
For the space bars you will need an extra switch and will need to re configure the software to suit the extra key.
Keycaps should be able to fit a maximum of a caps lock sized key without stabilzers (stabs version coming soon). However the distance of the of the key to the alt key is enough to fit a shift key (non iso layout)
MOVING notice !!!
I like thingiverse but I may decide to change sites as thingiverse is unsupported and is vulnerable to attack for people who upload 3D models. Luckily my accounts on Cults3D is linked to thingiverse so they are synced and it is much safer! all 3d models on thingiverse are avabile on Cults3D so you can still download my older 3D moels
Check my website as I provide updates and where I will reloacte.
I am thinking of
MyMiniFactory --
Thangs <-- account created will upload native files
YouMagine --
etc.
Category: 3D Printing