MOSFET Plate Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a MOSFET board mount for my Monoprice Maker Select v2.1. It's similar to the one linked as a remix, but it was…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a MOSFET board mount for my Monoprice Maker Select v2.1. It's similar to the one linked as a remix, but it was created from the ground up. The main feature is the standoff holes have threads for M3x6mm screws, which you should have a ton of if you've done the Z-brace mod.
I made the bottom solid so that you can use velcro or double-stick tape to adhere it to the inside of the case.
Print Settings
Printer Brand:
Wanhao
Printer:
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.12
Infill:
20% or solid, doesn't really matter
Notes:
The M3 threads are pretty fine, so the smaller resolution/layer height you can print it at the better. I did mine at 0.12mm and the threads worked pretty well.
Category: 3D Printer Parts