MOSFET Plate Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a MOSFET board mount for my Monoprice Maker Select v2.1. It's similar to the one linked as a remix, but it was…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 29
- Makes
- 0
- Views
- 142
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This is a MOSFET board mount for my Monoprice Maker Select v2.1. It's similar to the one linked as a remix, but it was created from the ground up. The main feature is the standoff holes have threads for M3x6mm screws, which you should have a ton of if you've done the Z-brace mod.
I made the bottom solid so that you can use velcro or double-stick tape to adhere it to the inside of the case.
Print Settings
Printer Brand:
Wanhao
Printer:
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.12
Infill:
20% or solid, doesn't really matter
Notes:
The M3 threads are pretty fine, so the smaller resolution/layer height you can print it at the better. I did mine at 0.12mm and the threads worked pretty well.
Category: 3D Printer Parts