Cable Holders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,31 € – 0,37 € netto (bez VAT)
Dla pliku: cable holder foot.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,34 € netto (środek widełek).
- Masa podana przez autora
- 3 g
- Czas druku podany przez autora
- 24 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Desktop or workbench clamp mounted cable holder UPDATE: small, Large, and X-large, as well as different orientations
- Ocena
- 0 / 5
- Polubienia
- 49
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 1032
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
*** NOW UPDATED WITH MORE SIZES AND CABLE ORIENTATIONS ***
For those times you simply cannot bear the thought of moving your desk or workbench to feed that pesky cord up into the daylight even once more… Salvation!
This clamp will tighten securely to your work surface and the rotating barrel will close securely around your cable(s) of choice, holding them in place until you need them.
Print with supports, or rotate 90 degrees and lay flat for easier printing. It is worth noting that the 90 degree gcode prints a little easier, but distorts the ears on the main clamp body so the rotating parts are not as smooth. I prefer to use tree supports and print upright.
The pin and foot files work with both jaw sizes.