Stylish Dual Headphone Holder Mount - Under Desk
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Under desk/table bracket to hang 2 or more pairs of headphones
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 103
- Wydruki
- 3
- Wyświetlenia
- 527
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
This stylish headphone holder can hold at least two, maybe three pairs of headphones.
The curved surface not only matches the shape of the head band, but improves the stiffness.
Cords can be passed through the cutouts.
Printing:
I strongly suggest using PETG, ABS, ASA, PC. I printed it Prusament PC Blend Carbon Fiber and it's really stiff.
PETG flexes more than PLA, so be sure to increase perimeters and maybe infill.
Increasing perimeters is the best way to increase the strength of the part. I designed it so infill is mostly eliminated with about 6 perimeters using a 0.4mm nozzle.
Using a 0.6mm nozzle will greatly speed up the print.
Variants:
- 50mm wide, no screw holes
- 50mm wide, screw holes
- 30mm wide, no screw holes
- 30mm wide, screw holes