Clamp adapter for Joule circulator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed to attach my Joule sous vide circulator to cooler and I didn't have a Joule Big Clamp.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed to hang my Joule sousvide circulator on a larger container, a cooler. I didn't have the factory option to facilitate this, the Joule Big Clamp. So I modeled this part that the regular wire hook attaches too. I printed it in PETG, and then attached to a plastic spring clamp that I already had in the workshop with a M3 stainless socket head screw and nut.
Needed:
- Some sort of clamp
- M3 Socket cap screw (appropriate length I used 16mm)
- M3 nut
I printed with 4 perimeters and 20% cubic infill in PETG with .4mm nozzle and 0.28 layer height. Can be printed without support cleanly as there is a 1 layer bridge built in that the screw can push through for the countersink.
Make and use this at your on risk.