Clamp adapter for Joule circulator
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed to attach my Joule sous vide circulator to cooler and I didn't have a Joule Big Clamp.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 174
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
I needed to hang my Joule sousvide circulator on a larger container, a cooler. I didn't have the factory option to facilitate this, the Joule Big Clamp. So I modeled this part that the regular wire hook attaches too. I printed it in PETG, and then attached to a plastic spring clamp that I already had in the workshop with a M3 stainless socket head screw and nut.
Needed:
- Some sort of clamp
- M3 Socket cap screw (appropriate length I used 16mm)
- M3 nut
I printed with 4 perimeters and 20% cubic infill in PETG with .4mm nozzle and 0.28 layer height. Can be printed without support cleanly as there is a 1 layer bridge built in that the screw can push through for the countersink.
Make and use this at your on risk.