1:10 Adjustable RC Chassis - Braced Front End
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adds an upper brace to stiffen and reinforce the front end
- Ocena
- 0 / 5
- Polubienia
- 50
- Pobrania
- 130
- Wydruki
- 0
- Wyświetlenia
- 2532
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
Tobias Christensen's fully printable pan car is an excellent and easy to print and build chassis. But the front end seemed a bit weak, so I modified it slightly to add an upper brace. Previously, the very thin section of the pan where the front frame attached was bending worryingly with even the slightest pressure. With the brace added, there is no flex in the pan and the TPU A-Arms are providing the suspension flex, as they should.
Simply replace the front pan section and front frame from the original with the parts from this remix, along with the brace piece to fit the wheelbase setting you're using.