Rancher 4x4 Suspension Lift Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a "bolt on" kit for lifting and converting the 2 Door Rancher 4x4 or similar models suspension to a true 4-link,
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 80
- Wydruki
- 1
- Wyświetlenia
- 1065
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Public Domain
4-Link Suspension Kit for Rancher 4x4 or other models with similar suspension.
This is a “Bolt-On” kit that requires no reprinting of most of the existing parts Just the Center Chassis Mount. All parts bolt onto existing holes or repurposes them.
This kit is changes the existing “3-link” suspension to allow for massive about more flexibility in the suspension and smoother movement.
All parts can be printed with no supports!! Suggest .20 layer heights and 25% infill for most parts. Larger parts like the Center Chassis Mount will be fine at 15%
- Center mount is replaced, and 4 mounting brackets are bolted on with existing holes to the main frame for the control arms. This removes the need for a track bar.
- Lower control arms are same length (120mm) Stronger arms are provided using same ball joints. Upper Front arms are (77mm) Rear Upper arms are (98mm)
- Brackets for locked and open differentials are provided to mount the upper control arms to the axles.
- Original Shocks can be used. Front axle brackets relocate shock mounts higher. Rear Shocks are mounted to the “rear shock mount” plate angling inward to allow for more flex.
- Front steering Tie-Rod gets relocated the the top of the knuckles. Drag-link is 3-parts, 2 ball joint connectors and a center bracket allows for the drop.
For my R/C I wanted it to be as fully printed as possible. I'm using fully printed shocks and TPU Tires. For these files please checkout my other models.