Iris - Shutter - Blende
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small shutter mechanism, thats closes thightly, made from thin first layer and gears
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 207
- Wydruki
- 1
- Wyświetlenia
- 1767
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
I was experimenting with designing some shutter mechanics.
My objective was to create a sleek design that minimizes the frame around the iris area. To achieve this, I opted for a 12-winged design. However, having 12 overlapping parts at the center would result in a noticeable hole when fully closed, so I shortened half of them.
Internally, it functions like a planetary gear system with the wings acting as a thin first layer on the planet gears. There are 12-tooth planet gears, a 60-tooth sun gear, and an 84-tooth ring gear.
This represents version 1.0 of my design, tailored for my door viewer. I 3D printed it using black PLA on an Ender 3 V2 printer and then applied primer and acrylic paint.
I had to do a significant amount of gluing for both the backplate and the frontplate.
Consider this as an experimental design for now. Assembly i kind of hard to describe, just place the 12 wings evenly. I am currently working on creating a larger version.